Interesting notation in Aida Act III

Discuss the rules of notation, standard notation practices, efficient notation practices and graphic design.
User avatar
David Ward
Posts: 240
Joined: 05 Oct 2015, 19:50
Location: Aberdeenshire, Scotland
Contact:

Interesting notation in Aida Act III

Post by David Ward » 15 Apr 2017, 21:23

In the first scan, what should one suppose is meant by the way the tremolos for 2nd violins are notated (compare with the more normally notated equivalent tremolo for Flute 3)?

The second scan (from a few pages earlier) shows a rare example of quadruple dots and also an unusual way of notating artificial harmonics.
Attachments
AidaTrem.jpeg
AidaTrem.jpeg (104.99 KiB) Viewed 3324 times
AidaDots.jpeg
AidaDots.jpeg (54.1 KiB) Viewed 3324 times

erelievonen
Posts: 96
Joined: 05 Oct 2015, 16:12
Contact:

Re: Interesting notation in Aida Act III

Post by erelievonen » 15 Apr 2017, 21:56

David Ward wrote:
15 Apr 2017, 21:23
In the first scan, what should one suppose is meant by the way the tremolos for 2nd violins are notated (compare with the more normally notated equivalent tremolo for Flute 3)?
I think it means nothing special. The modern rules for notating tremolos were only established in the 20th century; in 19th century works, tremolos are often notated "wrongly" in many different ways. In this excerpt, only the first tremolo of the 3rd flute is correctly notated by modern standards. But I have to admit the 2nd violins' notation is one I've never seen before.

User avatar
John Ruggero
Posts: 1281
Joined: 05 Oct 2015, 14:25
Location: Raleigh, NC USA

Re: Interesting notation in Aida Act III

Post by John Ruggero » 15 Apr 2017, 22:28

Being such a practical musician, Verdi was concerned about the players immediately understanding the length of each tremolo since they alternate between a dotted quarter and quarter in total duration. So he came up with something original. The flute didn't need such clarification since it only uses tremolos of whole and half measures. The following example from the same place in the opera might make this clearer:
Verdi tremolos.jpg
Verdi tremolos.jpg (89.59 KiB) Viewed 3316 times
Mac mini (OS 10.8.5) with dual monitors, Kurzweil Mark 5 with M-Audio Midisport 2 x 2,
Finale 2014d with GPO 4, JW Plug-ins, SmartScore X Pro, Adobe InDesign CS4,
Inkscape .48.5 and .91, FontForge 20150526
http://www.cantilenapress.com

MJCube
Posts: 130
Joined: 15 Dec 2015, 13:32
Location: NYC

Re: Interesting notation in Aida Act III

Post by MJCube » 28 Apr 2017, 17:00

erelievonen wrote: In this excerpt, only the first tremolo of the 3rd flute is correctly notated by modern standards. But I have to admit the 2nd violins' notation is one I've never seen before.
I tried to recopy this in Sibelius and found I couldn’t get the beams the way Verdi wrote them with any setting. Then I realized what erelievonen meant: This half-measure duration requires two :4d and the connected beams make them look like :3d — Modern notation requires all 4 tremolo beams between stems, with none touching.

To me this is terribly cumbersome notation for a vanishingly tiny detail — a change in only the last of 24 notes of an extremely quiet measured tremolo — in a whole section of strings, no less. I wonder if this tiny passing tone is ever even heard. Here’s a different notational idea to maybe gain the same effect with much less clutter:
Attachments
Aïda Vl. II with grace.png
Aïda Vl. II with grace.png (14.09 KiB) Viewed 3243 times

User avatar
John Ruggero
Posts: 1281
Joined: 05 Oct 2015, 14:25
Location: Raleigh, NC USA

Re: Interesting notation in Aida Act III

Post by John Ruggero » 30 Apr 2017, 18:16

This unusual notation is possible in Finale:
Verdi tremolo.jpg
Verdi tremolo.jpg (7.95 KiB) Viewed 3210 times
MJCube's version is simpler and probably better. Maybe the following would be even clearer?
MJCube tremolo.jpg
MJCube tremolo.jpg (8.94 KiB) Viewed 3210 times
Mac mini (OS 10.8.5) with dual monitors, Kurzweil Mark 5 with M-Audio Midisport 2 x 2,
Finale 2014d with GPO 4, JW Plug-ins, SmartScore X Pro, Adobe InDesign CS4,
Inkscape .48.5 and .91, FontForge 20150526
http://www.cantilenapress.com

User avatar
David Ward
Posts: 240
Joined: 05 Oct 2015, 19:50
Location: Aberdeenshire, Scotland
Contact:

Re: Interesting notation in Aida Act III

Post by David Ward » 30 Apr 2017, 21:37

MJCube wrote:
28 Apr 2017, 17:00
… … I wonder if this tiny passing tone is ever even heard… …
I think its absence would be heard, or at least sensed, even allowing for the fact that most members of the audience will be far more aware of the vocal line than of the orchestral detail. (Mind you, sopranos do seem altogether more willing/able than tenors to sing quietly when Verdi asks.)

User avatar
John Ruggero
Posts: 1281
Joined: 05 Oct 2015, 14:25
Location: Raleigh, NC USA

Re: Interesting notation in Aida Act III

Post by John Ruggero » 01 May 2017, 03:18

I agree completely, David. The passing note is needed to connect the trills to the lower auxiliary into a smooth chain. And it is not clear that the trill ends on the principal note unless it is written in, thus my suggestion for improving MJCube's version.
Mac mini (OS 10.8.5) with dual monitors, Kurzweil Mark 5 with M-Audio Midisport 2 x 2,
Finale 2014d with GPO 4, JW Plug-ins, SmartScore X Pro, Adobe InDesign CS4,
Inkscape .48.5 and .91, FontForge 20150526
http://www.cantilenapress.com

erelievonen
Posts: 96
Joined: 05 Oct 2015, 16:12
Contact:

Re: Interesting notation in Aida Act III

Post by erelievonen » 01 May 2017, 10:39

The main problem with both MJCube's and John's simplified notations is that they strongly imply that the tremolo is unmeasured. While Verdi's notation strongly implies a measured tremolo.

User avatar
John Ruggero
Posts: 1281
Joined: 05 Oct 2015, 14:25
Location: Raleigh, NC USA

Re: Interesting notation in Aida Act III

Post by John Ruggero » 01 May 2017, 16:59

You are probably right, although there is the possibility that it was simply a device to be enable him to notate the passing note. Are these tremolos actually measured in performance?
Mac mini (OS 10.8.5) with dual monitors, Kurzweil Mark 5 with M-Audio Midisport 2 x 2,
Finale 2014d with GPO 4, JW Plug-ins, SmartScore X Pro, Adobe InDesign CS4,
Inkscape .48.5 and .91, FontForge 20150526
http://www.cantilenapress.com

User avatar
David Ward
Posts: 240
Joined: 05 Oct 2015, 19:50
Location: Aberdeenshire, Scotland
Contact:

Re: Interesting notation in Aida Act III

Post by David Ward » 01 May 2017, 19:25

John Ruggero wrote:
01 May 2017, 16:59
… …Are these tremolos actually measured in performance?
Not usually, anyway.

Post Reply