Page 1 of 2

Legitmacy of Dotted Tuplets

Posted: 01 May 2021, 02:32
by ConnorGBrown
Hello,

I've just used Sibelius to write out a septuplet over a dotted quarter (half of the 6:8 bar). To fit it, I used a custom tuplet of 7:6, and then hid the 7:6 (the ratios often being unnecessary) and replaced it with a text character.
Screen Shot 2021-04-30 at 10.34.55 PM.png
Screen Shot 2021-04-30 at 10.34.55 PM.png (27.32 KiB) Viewed 5090 times
The other option required dotted sixteenths, as the tuplet was taking place over a dotted quarter. Using ordinary sixteenths would of course net me a tuplet taking place over only two eighth notes instead of three.
Screen Shot 2021-04-30 at 10.17.02 PM.png
Screen Shot 2021-04-30 at 10.17.02 PM.png (81.94 KiB) Viewed 5091 times
Would using the dotted sixteenths be a legitimate method of writing the septuplet, or is that simply a computer-related notation quirk?
I can't imagine ever seeing anyone write this by hand as dotted sixteenths, though the purely mathematic reasoning for it is there.

Has anyone seen this done by proper engravers, or is it simply an issue found within notation software?

Thanks!

Re: Legitmacy of Dotted Tuplets

Posted: 01 May 2021, 12:30
by David Ward
I would certainly regard the first as correct. In Finale (using Speedy Entry) it is very easy to do as I would expect (screenshot). Is this really difficult in Sibelius?

Re: Legitmacy of Dotted Tuplets

Posted: 01 May 2021, 12:48
by John Ruggero
I agree with David, the first example is the usual way to do it. But surely Sibelius can't require a workaround to do something so basic.

The second version is not correct since a septuplet of dotted sixteenths replacing six dotted sixteenths is clearly not equal to 6 regular sixteenths. On the other hand, 8 dotted thirty-seconds would equal 6 regular sixteenths in 6/8 meter. So I guess one could do a 7:8 septuplet of dotted thirty-second notes, if one wanted the most esoteric solution. But many prefer that the number of notes in a tuplet always be greater than the number of corresponding real values; so they wouldn't be fond of this solution.
Example.jpeg
Example.jpeg (38.64 KiB) Viewed 5062 times

Re: Legitmacy of Dotted Tuplets

Posted: 09 May 2021, 13:57
by ConnorGBrown
Right, John. The sixteenths / thirty-seconds issue is a good point.

The reason for the oddness in Sibelius is that it uses a very handy quick entry tool for tuplets that—in this case—had a wonky result. If you write a note (e.g. quarter note), then press command-3, it will create a quarter note triplet (which takes up a half note of space). If I placed a sixteenth and pressed command-6, the resultant sextuplet would occur over a single quarter note. For the septuplet, I believe it does the same thing and places the seven notes over a single quarter note, which in the above case is unwanted because the bar is 6:8 not 4:4. Since Sibelius assumes you're placing the tuplet over a single quarter note and not a dotted quarter (the half beat of 6:8), it comes out leaving that unwanted extra eighth rest. If you make dotted sixteenths though, the tuplet becomes "dotted" essentially, and so the quarter-note that it took up before now becomes a dotted quarter (the bottom picture in my first post).

Anyway, that version is clearly funky. I hadn't thought much further into it; it's definitely a computer-related issue and not something a real engraver would do.

Though I'd still be interested in seeing if anyone ever writes dotted tuplets. I'm not sure I've seen on the in the wild, but composers can be crazy in the most tedious of ways.

Thanks!

Re: Legitmacy of Dotted Tuplets

Posted: 09 May 2021, 18:54
by RMK
ConnorGBrown wrote: 09 May 2021, 13:57
Though I'd still be interested in seeing if anyone ever writes dotted tuplets. I'm not sure I've seen on the in the wild, but composers can be crazy in the most tedious of ways.

Thanks!
Elliott Carter

Re: Legitmacy of Dotted Tuplets

Posted: 11 May 2021, 11:53
by OCTO
ConnorGBrown wrote: 01 May 2021, 02:32 Hello,

I've just used Sibelius to write out a septuplet over a dotted quarter (half of the 6:8 bar). To fit it, I used a custom tuplet of 7:6, and then hid the 7:6 (the ratios often being unnecessary) and replaced it with a text character.
There is a plug-in called NbyM Tuplet that can create any tuplet in Sibelius. See attached file.
And no, please, no dots! :)

EDIT:
I would suggest a more appropriate way to write tuplets in the compound time. Irregular tuplets in the simple time is "extended upwards" (2 to 3; 4 to 5, 6, 7; 8 to 9, 10...) while in the compound time the tuplet is "deduced downwards" (3 to 2; 6 to 5 and 4; 12 to 11, 10, 9, 8, 7).
Thus it needs to be 7:12 in :1

Re: Legitmacy of Dotted Tuplets

Posted: 21 May 2021, 10:49
by Anders Hedelin
OCTO, I couldn't open your plg-file on my computer. Can you tip me how to, or possibly post it another format?

Re: Legitmacy of Dotted Tuplets

Posted: 01 Jul 2021, 10:02
by OCTO
Anders Hedelin wrote: 21 May 2021, 10:49 OCTO, I couldn't open your plg-file on my computer. Can you tip me how to, or possibly post it another format?
Oh, sorry, I have not seen your question/post.
Yes, simply you put the file in your plugin folder for Sibelius.

Re: Legitmacy of Dotted Tuplets

Posted: 01 Jul 2021, 14:26
by Anders Hedelin
Thanks OCTO. I wasn't sure how to handle plugin files when I read your earlier post. Since I'm a Finale user, do you happen to know of something similar for that program?

Re: Legitmacy of Dotted Tuplets

Posted: 02 Jul 2021, 10:24
by OCTO
Anders Hedelin wrote: 01 Jul 2021, 14:26 Thanks OCTO. I wasn't sure how to handle plugin files when I read your earlier post. Since I'm a Finale user, do you happen to know of something similar for that program?
In Finale you can already use any:any tuplet. :)
Like 5 :6 : 2 :1